In a message dated 1/10/05 5:16:50 PM Central Standard Time, mydmc5898@xxxxxxxxx writes: > The distrubitor isn't leaking at all, he said that there is a pin that > alows a plate of some kind to move (sorry for being so general but I'm pretty bad > at this stuff at the moment) and the pin is bent out of shape, what happnes > is when the car starts it could be cold or hot and the car will start fine > but once you push the gas and let of the clutch the car will hesitate. If you > rev the engine it smooths out, if I don't rev it it will stall. It did it with > both tranny set ups. > How about sending your distributor to PJ Grady and letting them test it for proper function? They will clean it for you while it is there and let you know if it really needs replacing. that's a lot of money to drop on a part when similar symptoms could come from a vacuum leak or poor CO setting. Andy [Non-text portions of this message have been removed] To address comments privately to the moderating team, please address: moderators@xxxxxxxxxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/dmcnews/ <*> To unsubscribe from this group, send an email to: dmcnews-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/