Re: [DML] Re: a few nit picks

[Darryl Givens <mydmc5898@xxxxxxxxx>]

I did use a vendor clutch kit, I know he said that he replaced the seal along with installing everything. But it is leaking from what seems to be the rear also a small puddle forms underneath it, I assumed it may just be the way its dripping down. (I hope)

I have the 180 amp from GM, the mechainc did all of the work, but if you do have the instructions, maybe I can take a look, I'm not very good at that stuff but I can always pass it along.

The distrubitor isn't leaking at all, he said that there is a pin that alows a plate of some kind to move (sorry for being so general but I'm pretty bad at this stuff at the moment) and the pin is bent out of shape, what happnes is when the car starts it could be cold or hot and the car will start fine but once you push the gas and let of the clutch the car will hesitate. If you rev the engine it smooths out, if I don't rev it it will stall. It did it with both tranny set ups. 

 

Thanks,

Darryl VIN 5898 





__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

[Non-text portions of this message have been removed]






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/