I would not run ANY flush agent through the system, period. If you fell the need to flush, take the block drains out and flush with clean water. You are asking for trouble and possible internal leaks, not to mention a water pump seal failure by using a flushing agent. Harold McElraft - 3354 --- In dmcnews@xxxxxxxxxxxxxxx, jordan rubin <nuttenschleuder@xxxx> wrote: > Hello all: > > Well looks like my original hoses are finally > leaking. Minor but still so. Ive ordered the > complete hose kit from delorean today and may be doing > this project next week, for all of you how to loving > folk. > > Heres the issue. (up for debate) > > 1. Should I run that crap removing cleaning stuff in > the cooling system to get the garbage out. > > 2. If so, should I do it with the old hoses, flush it > and drain it and then put the new hoses on. > > 3. Or first put the new hoses on and then flush the > system with the cleaning substance. > > i know this is trivial, i just wanted everyones take. > > PS. if you are in agreement with using this stuff what > brand do you recommend. > > should you flush it with distilled water for the whole > processs, or use the ol garden hose for the flushing > and then give it a once through with distilled before > refilling. > > > obviously for the refilling ill used distilled only. > > > thanx > > jordan 11613 > > > > __________________________________ > Do you Yahoo!? > The New Yahoo! Shopping - with improved product search > http://shopping.yahoo.com