Re: [DML] Re: a little more idle work needed
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Re: a little more idle work needed



Tonight after work i checked my ignition timing just for the heck of it.
At idle with the car fully warm, it was advanced!!!
I pulled the vac hose off the ignition advance and there was no vacuum! Just 
a popping kind of sound when i first removed it, but no sucking. i put it 
back on, checked the timing again, it was back to normal. it seems like it is 
going back and forth on its own. the solenoid is new.

what gives? i redid the wires on the idle speed switch and they aren't loose 
anymore. what is going on here?

how do i hook up my multimeter so i can tell if the switch is operating 
correctly? it is being engaged and disengaged when it should be.

i'm really confused now....
Andy


[Non-text portions of this message have been removed]






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated