Re: Correction: [DML] Re: hard starting when cold? Message #35889
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Correction: [DML] Re: hard starting when cold? Message #35889



In a message dated 10/1/03 10:45:43 AM Central Daylight Time, 
brobertson@xxxx writes:

> Expected someone to catch this. Thought about it later myself but
> "send" button already pressed...
> 
> To test cold start valve simply swap electrical plug with warm up
> regulator (which you already know is electrically OK). A lot easier
> than running wires to jump start post and block. Apologies.
> 
> Bill Robertson
> #5939

Yeah, actually i figured that out before i read this too. i found that the 
cold start works when using the CPR wiring, so i ordered a new thermotime 
switch and hopefully all will be good.

Andy


[Non-text portions of this message have been removed]






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated