Re: Evaporator Core
   
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Evaporator Core
- From: "Dave Swingle" <swingle@xxxx>
 
- Date: Sun, 07 Sep 2003 23:44:25 -0000
 
The large tube is approximately 20 inches long, the smaller one is
approximately 17 inches. Measured from where the pipes join the 
evaporator to the end of the connector including the fitting.
>From the point where the pipes meet is mor lie 10 inches from the 
backside of the smaller tube.
I'm using approximations because the pipes have some sharp bends that 
are hard to follow with a tape measure.
Would photos help?
Dave Swingle
--- In dmcnews@xxxxxxxxxxxxxxx, "Paul Salsbury" <paul.salsbury@xxxx> 
wrote:
> Hi there all
> 
> Does any one have an evaporator core out of their car? I am 
looking for a measurement of the length of the two pipes, from the 
point where they meet to the connectors. Mine has had the connectors 
taken off. As it is now out of the car If the pipes are long enough I 
can have then replaced.
> 
> Cheers
> Paul
> #6463
 Back to the Home of PROJECT VIXEN