Start with the Diagnostic Chart on page 126 of the Technical Information Manual. That is really the only way to go through the steps . Otherwise you will end up jumping all over. Harold McElraft - 3354 --- In dmcnews@xxxxxxxxxxxxxxx, "anaheim_21" <anaheim_21@xxxx> wrote: > Hello all: > > I cannot get my DeLorean to start. I thought the fuel pump was bad, > however when I jumped the RPM relay it was working. I then thought > the RPM relay was bad so I installed the relay updates, however that > has not fixed the problem. > > The Inertia switch is closed, so that is not the problem, either. > What should I do next? > > Greg