Tuning Idle Speed Circuit. (was: Re: idle problem)
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Tuning Idle Speed Circuit. (was: Re: idle problem)



It sounds to me like your Lambda system just died. Troubleshoot to
find the reason (very common for the relay to die). Since the Lambda
wasn't adding fuel you compensated by going overly rich with the
mixture screw. You should hear the frequency valve buzz whenever the
engine is running. You are almost there, get the Lambda running again
and it sounds to me like you have it just about right! (Of course
readjust the mixture screw with the Lambda running).
David Teitelbaum
vin 10757 


--- In dmcnews@xxxxxxxxxxxxxxx, "Rustproof" <Rustproof@xxxx> wrote:
> Having taken all the advice I could get from the list and the
archives, I
> have attempted to set up both the CO mixture as well as the CIS
idle. This
> was fiddled with by the previous owner and never properly reset. I 






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated