Re: [DML] drivers trim loose
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] drivers trim loose



> What is the easiest way to remove the rear
> plastic trim that covers the speaker?

All I needed when I replaced my rear speakers was a hair dryer and a lot of
patience. I removed the door seals and used the hair dryer to heat the
portion of the trim pieces that wrap underneath the seals. Once it got warm
enough, it not only made the plastic pliable but also softened the glue
holding it down. I was able to peel the plastic back, while being careful
not to create any splits in it. After that, the rest of the process was
simple (undo the seat belt, remove panel, swap speakers, etc). As always,
your mileage may vary. This worked great for me, though.

Good luck!
_______________
Todd Masinelli
VIN 6681







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated