RE: [DML] Car runs then quits Electrical problem.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Car runs then quits Electrical problem.



Ken, The first thing I would check is the pulse coil. 600ohms about cold and
hot would be open. And 2nd would be any loose connections on the resistor.
If ok then back track from there.
John Hervey


-----Original Message-----
From: kKoncelik@xxxx [mailto:kKoncelik@xxxx]
Sent: Friday, August 01, 2003 5:05 AM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Car runs then quits Electrical problem.




Here is a problem I have had on two cars.

The car starts normally and runs fine. All of a sudden it quits
Diagnosis : No spark.
There is power to the coil and when you put power to the key you can get a
spark (one) across a plug when going direct from the coil)





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated