[DML] Re: Idle speed regulator removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Re: Idle speed regulator removal



To see the hole in the bottom of the fuel housing that the tube from 
the IAC motor goes into. Although Hank noted to me that you can also 
see it from above with a sufficiently bright light. I just recall 
that finding the hole with the o-ring where that tube goes to be a 
tremendous pain. 

Dave 

--- In dmcnews@xxxxxxxxxxxxxxx, jordan rubin <nuttenschleuder@xxxx> 
wrote:
> Dave,
> 
> 
> Im wondering what the mirror is for. It looks to be
> like the two rubber hoses connected on both sides are
> in reasonably accessable location, unless there is
> something else im missing.
> thanx
> 
> jordan 11613
> 
> --- Dave Swingle <swingle@xxxx> wrote:
> > Getting it out is the easy part. Pull it and the
> > whole tube out. 
> > Getting it back in is another matter. Involving some
> > luck and small 
> > mirrors. It's quite do-able though. See adjacent
> > post for the 
> > pitfalls. To avoid dirt clean everything before you
> > start taking 
> > things apart. 
> > 
> > Dave Swingle






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated