RE: [DML] Re: Replacement MSD Coil
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DML] Re: Replacement MSD Coil



9500-ish is the correct resistance as checked against a new one. The 25KVA
Bosch coil is 14,500 resistance.
John hervey


-----Original Message-----
From: cruznmd [mailto:racuti1@xxxx]
Sent: Tuesday, July 29, 2003 4:28 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Re: Replacement MSD Coil


I realize this discussion wasn't about -my- car but my voltage across
the coil (+ to -) terminals was only 6.73 volts. All of the
resistances were in spec by the manual -except- the coil, (+) terminal
to H.T. socket, it's supposed to be 7000 ohms and mine is 9500-ish.









Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated