what i really needed was that values for the fuel distributor. jordan 11613 --- John Hervey <john@xxxx> wrote: > Be carefull even on the torque values. You might > find thats to much. Use a > 3/8" drive and snug the plugs down and then give it > a little lock down. > Usually that's enough. Threads could be striped if > to much torque. > John Hervey > www.specialTauto.com > > > -----Original Message----- > From: jordan rubin > [mailto:nuttenschleuder@xxxx] > Sent: Friday, July 18, 2003 4:50 AM > To: dmcnewsgroup > Subject: [DML] Torque values and spark gaps > > > Hello all: > > The Delorean book isnt highly informative. This > is what Ive managed to grab out of it for this > weekends project. Some are hard to read though so I > need to be sure. > > SPARK PLUGS > > TORQUE 13-15 FOOT LBS > GAP 0.024-0.028 IN > >