Re: [DML] Radiator Question.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Radiator Question.



--- In dmcnews@xxxxxxxxxxxxxxx, jwit6@xxxx wrote:
> I used Summit Racing High Efficiency 12 inch fans. The dimensions are 
right and they bolt up after drilling 4 small holes in the rad flanges. Very neat 
installation. Part number SUM-G4902 at $69.99 each.
> Jim 6147

Thanks for the info. The reason that I was curious about the specs on the 
factory fans was because I was looking at a replacement aftermarket set. The 
problem that I have isn't just a need for new fans, but a new fan cowl as well, 
since mine is partially damaged (cracked and chipped).

What I was looking at was a complete 12" dual puller fan assembly that pulls 
2500cfm total, @19.5 amps for $195. (FYI, it's 15-1/2''x26-1/4''x4-18'')

Price isn't the determining factor here. Performance is. If the stock set up 
works better at cooling, then I will opt for it. Plus I am not fond of fabrication, 
and need to make sure that something else would of course fit. But if there is 
an alternative that allows for better cooling, and A/C performance, it is 
something that I would be quite interested in.

-Robert
vin 6585 "X"






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated