Re: Recall campaign
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Recall campaign



If you are interested in having ALL of the recalls you need to get in
touch with a Delorean vender, any should be able to help you. The ones
to check for include the following:

Sway bar strengthing brackets (this is the one you asked about)

Ball joint recall (drilling for cotter pins)

Inertia switch (placement change and improved inertia switch)

Updating the pipe with the otterstadt switch (cutting and turning the
pipe and changing a hose)

Removing the fan fail relay

Installing the "relay upgrade kit"

Disconnecting the lock module till upgrading or replacing it
David Teitelbaum
vin 10757



--- In dmcnews@xxxxxxxxxxxxxxx, sand131@xxxx wrote:
> I remember that a recall was made to add strength to the front frame
tubes. 
> Can anyone supply the info regarding this update and/or supply the
parts 
> required to effect it.
> Thanks,
> Ralph VIN 1606
> 
> 
> [Non-text portions of this message have been removed]






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated