Re: Nasty screws and bolts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Nasty screws and bolts



> So what's the best option now? Cut the tray up into pieces so I can
> get to the washer pump? Take the entire front end apart? Drill the
> bolts and then replace them with...? This should have been a 20
> minute job...
> 
> Aaron
> #1506

Hi Aaron.

My car had lots of screwed up bolts. I drilled out some, used a 
handheld rotary tool (Dremel) with the little cutoff wheels on 
others, and on a few, I used an industrial silicon carbide cutoff 
wheel in a drill chuck.

I think I drilled some of those fasteners on my car, but I can't 
remember.

Rick.







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated