I also use fuel line hose in place of traditional vacuum hose. Holds up much better in engine compartment environment, and in applications close to the asphalt. My DeLo's coolant bleed lines use fuel hose. Important note: do not use regular fuel line hose in fuel injection system. High PSI will break tiny bits loose and eventually clog injectors. Is hose especially for fuel injection that looks similar but performs differently (not fluorelastometric lined, but solid rubber). Try to remove from a hose barb and you'll see difference. Bill Robertson #5939 >--- In dmcnews@xxxxxxxxxxxxxxx, "John Hervey" <john@xxxx> wrote: > Mark, I would use fuel line hose like 30R7, It has a lining that resist > harsh chemicals. Any auto store should have it. > John > > > -----Original Message----- > From: id [mailto:ionicdesign@xxxx] > Sent: Sunday, May 11, 2003 12:46 PM > To: dmcnews@xxxxxxxxxxxxxxx > Subject: [DML] Clutch master cylinder > > > The hose that goes from the fluid reservoir to the clutch master cylinder is > in bad > shape on my car, what kind of hose can i use to replace it with? > > Mark > 6683 > > > > > > To address comments privately to the moderating team, please address: > moderators@xxxx > > For more info on the list, tech articles, cars for sale see www.dmcnews.com > > To search the archives or view files, log in at > http://groups.yahoo.com/group/dmcnews > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/