Jeff, If want to contact me off the list, I can help you with the seat covers. John Hervey www.specialTauto.com -----Original Message----- From: Jeff [mailto:webmaster@xxxx] Sent: Saturday, May 10, 2003 12:35 PM To: dmcnews@xxxxxxxxxxxxxxx Subject: RE: [DML] recovering seats - retry- Ok, so this seemed rare to me, but I got 0 replies!! So I'm resending this one.. maybe few words might have filtered it out to those who know. Anybody? Ok, now here's a baffler. Got a pair of seats that I'm going to recover. First off, I'll never say that the D seats were ever half-heartedly built, because of two words. Hog rings. Darn there are a lot of them there!! Ok, so, got main back of the seats pulled and the foam exposed. Problem is when you get to the headrest. (I'm sure some of you already know where I am going with this.) ok, so that little notch of leather between the main seat and the headrest is a nice addition, but is a pain to work around. Two sets of hog rings holding that together. Ok, so I dealt with that and now here is the problem. How do I get the covers off the headrest without damaging the foam? And worse yet, how do I get new covers back on and the hog rings into spaces to re-establish that "notch" ? Am I in for any other surprises? It makes me wonder how they covered these things in the first place. -Jeff Chabotte Norwich, CT Webmaster, http://www.88-mph.com To address comments privately to the moderating team, please address: moderators@xxxx For more info on the list, tech articles, cars for sale see www.dmcnews.com To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/