Re: AC fan 3 and 4 positions
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: AC fan 3 and 4 positions



I forgot to mention that if I turn the Fan switch to 1 or 2 or simply 
turn the AC off for a minute it all works fine again...

Michael

--- In dmcnews@xxxxxxxxxxxxxxx, "dmcorlando2003" <SundeQuick@xxxx> 
wrote:
> After my AC runs for awhile (30-45 min or so) Wen the Fan is on 3 
or 
> 4 it cuts off. I kow the are on two seperate relays, one for 3 and 
> one for 4. Whatis causing this...is it that they are over heating? 
> Do they need to be replaced? (Should I swap them with one of the 
> other relays like the high or low beam and try that first?)
> 
> Unfortunately I am never in a position to check them out when the 
fan 
> stops.
> 
> Michael
> Vin# 2944







Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated