>From your description you might also consider vacuum leaks causing the fuel mixture to be different on each cylinder. Replace the injector seals. David Teitelbaum vin 10757 -- In dmcnews@xxxxxxxxxxxxxxx, "therealdmcvegas" <DMCVegas@xxxx> wrote: > I realize that "Mechanic in a Bottle" doesn't exist. What I was looking for was > "Bribe in a Bottle" to pass the emissions testing! ;-p Of course I am admittedly > kicking my self twice over now. 1: I wasted money, and 2. The disclaimer for > the "Will allow your car to pass, or double your money back!*" *Only > guaranted on vehicles with properly funtioning emissions, and fuel systems. > Doh! > > Anywho. I pulled the sparkplugs, and have discovered that plugs 1-3 show > normal characteristics, although 4&5 had much less carbon on them. This > could be due to the detergents and solvents that were run thru, I don't know. > And then we come to plug #6, which was dry fowled. Unlike the others plugs, > on this one the only place where carbon deposits had not covered anything > was on the tips of the electrodes where the spark was arcing. Although on a > side note, the ceramic insulater on the OUTSIDE of plug #5 is severly > yellowed on the bottom. This is the crooked plug as well, if that makes a > difference. > > So now I know for certain that this is a problem with the fuel delivery system. > The gap ranges were varied on the plugs (between .27-.35), but this plug was > literally middle of the road @ .32, compared to the others, which were clean. I > still need to test the spray patterns & output volumes (need one more jar). But > based upon the CIS theory, I would assume that injector #6 is clogged, which > not just fowled the plug, but caused a rich condition in the remaining 5 > cylinders due to the lack of it's own proper fuel displacement. So now I'd like > to clean the injectors. But as it turns out, my local official BOSCH service > center can't do, since their machine is broken. So I'm off to find someone who > can...