There are three wires. PW (purple/white) P (purple) and a B (Black). The best way to figure it out is to look on page 112 of thr Technical Information Manual. PW and B provide a ground. P is connected to one side of the bulb and the switch rocks between the B which is "on" and the PW which is a "delayed" grounding circuit. P is "hot at all times" through fuse 12. Harold McElraft - 3354 --- In dmcnews@xxxxxxxxxxxxxxx, wmack <wmack@xxxx> wrote: > Can someone explain which colored wires go where, for the light switch to > function properly? > > Thanks > Willie Mack > Vin 5043 > > >===== Original Message From gw2tulsa@xxxx ===== > >The back light works fine. My plan was to outright switch them out since I > have no need for the rear light... > > > >Thanks for the info on removal. I figured it was something like that... > > > >-Gary > > > > [moderator snip]