I have a very small leak on my passenger side coolant pipe at the rubber "elbow" under the engine where it begins to lead up toward the resevoir tank. It is the 16 inch aluminum coolant pipe pipe and not the rubber hose. I had some corrosion on the ends and it appears there must be a small pinhole crack in the aluminum near the end. If this was at any other spot I would just cut a longer rubber hose and clamp past the hole. Unfortunatly, it is near the special elbow hose. I may just buy another coolant pipe but I was just wondering if there was an easy fix for small holes or corrosion cracks in these pipes... thanks Mike C 2109 [Non-text portions of this message have been removed]