air inlet valve
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

air inlet valve



Hey-
I was tightening my body-frame bolts (and boy did they need it) and pulled
the air inlet valve off to get to that one bolt in the pontoon.

I noticed that it was still mostly closed allowing hot air even though it
was 70ish.
I then noticed that it didn't moved when I heated it up. Another aged part
to check, guys. There is a little indicator on the side that tells you what
air the valve is letting in at the moment, so you don't have to remove it to
check.

There not too expensive at my local part store (www.delorean.com) at about
$58, but unfortunately they're closed on Saturdays and Warren, James or
Stephen have failed to give me their home numbers for weekend parts. :D
So I pulled it off, fiddled around with it, lubed it, and freed it up some,
but it still wouldn't open fully to cold air. I adjusted the plastic nut and
got it to where I think it will operate better. I tossed it in the fridge
and noted that it closed fully, but it sure is slow to open up again.

What is the replacement schedule for these guys? What about regular
adjustments?

-Kevin
#4687






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated