My car had an intermittent problem with this also. I found it to be a poor connection at the connector block in the front facia. you have to remove a headlight to get to it. Adam --- In dmcnews@xxxxxxxxxxxxxxx, "netym89" <delorean@xxxx> wrote: > Hey, > Here is the deal! Car 10250 is going onto the movie scene and I had > to replace my window motor assembly this morning; 2.5 hours with no > cuts and bandages!! A little challenging but not bad. > The turn signal on my car just stopped working. The studio needs it > fixed by Saturday evening. I checked Fuse#4 okay; The emergency > flashers are working fine. Checked the schematic and this is what I > think: > 1. Check power to Fuse#4. > 2. Flasher unit must be working because the Hazard light circuit uses > it as well. > 3.Turn signal switch could be defective. > 4. Check pins 5 and 6 for continuity. If not, hazard switch defective. > > I need an opinion from somebody on this. What is the most common > fault found for this symptom. > > PS. I like to go back tomorrow to check the car once more. > > Emails to: delorean@xxxx