In a message dated 2/6/03 10:40:31 AM Central Standard Time, webmaster@xxxx writes: > > To convert from Odd to even you'd need to re-fit the crank and cams before > the dizzy. As my guy has pointed out, the crank in the even fire engies > cannot be dropped into the DMC's block - the bearings are different (If I > Martin, The main bearing sizes in the Even fire 3.0 Eagle and the Odd fire 2.8 Delorean PRV engines are exactly the same size and spacing. Either crankshaft will fit either block. The problem you run into is not with the crankshaft bearings, but with the connecting rod bearings. Both the large end rod bearing and small end piston pin are different between the 2.8 and 3.0 engines and cannot be swapped. So if you have a 2.8 crank, the 3.0 rods and pistons will not fit and vis-versa. Marty [Non-text portions of this message have been removed]