While it MAY work on a modern car with thin cold rolled steel panels it DOES NOT WORK on the Delorean with S/S panels that are much thicker than the panels on newer cars. S/S has a much higher tensile strength meaning it takes a lot more energy to bend it. Also once the metal is stretched even if you do manage to "pop out" the dent you will have a bubble as the stretched metal has to go somewhere. What needs to be done in this case is to "shrink" the metal which is something the DingKing cannot do. In general I do not trust the things advertised on TV. Instead of the DingKing you can do just as well with a suction cup or if you can get behind just push it out if it is just a bumped in dent and is not stretched. Save your money on this one! It is very tempting to think you can buy something like this and do your own body work. I saw first-hand the uselessness of this device on another member's car. David Teitelbaum vin 10757 --- In dmcnews@xxxxxxxxxxxxxxx, "jevans742003 <nucleus@xxxx>" <nucleus@xxxx> wrote: > Will the DingKing contraption you see on tv work on pulling dents out > of our stainless steel panels? Any other ideas?