The bad news is one of those sold yesterday on eBay for $32... Did you end up using a helicoil on your water pump bolt? If not, here's another great opportunity to put one in. And it's a whole lot easier to access! (personally I'd drill it off the car). As before, you may end up converting to SAE. Be gentle -- cast aluminum is almost too easy to drill and tap. Bill Robertson #5939 >--- In dmcnews@xxxxxxxxxxxxxxx, "James LaLonde <deloreandmcxii@xxxx>" <deloreandmcxii@xxxx> wrote: > I noticed that neither PJ Grady or DMCH have this particular part in > thier cataloge, though I've yet to call. > It's listed as #10 in the Engine:Air Induction (1-4-1) section of the > parts manual. > It's the piece of tubing between the air mixture chamber and the w- > pipe, the part with the butterfly plates in it. Not sure what you'd > call it. > The only reason I need one is because the hole that the bolt that > holds the w-pipe to this piece is stripped out. > > So, I'm looking for a used one. If anyone has a lead on one, I'd > appreciate it. Contact me off list to arrange payment etc.. > > > thanks. > James LaLonde