Re: [DML] grounding equipment to battery?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] grounding equipment to battery?



Andy:

The best ground is to the power source itself, which is the battery. There 
is no substitute for a good ground and the battery's terminal is the best 
point. The frame and all other "attached" components which is to be used as 
a grounding point, will in time have some resistance due to corrosion and the 
dissimilar metals will enhance this process. Just make sure that your ground 
wire, as your "supply wire," are the correct gauge for the "said" equipment 
and don't forget to use a heavier gauge for the longer "running length." 
Also make sure all the terminals and hold screws downs are tight, for they do 
losing up through time by vibration and heat which will cause arcing.

FYI..... High power audio amps with the inadequate thinner gauge wire will 
suffer power lose, besides dangerous wire melt down. Thinner gauge wire 
result in degradation of sound, especially in the low bass frequencies and 
the high end "sweetness" if the amp is capable of delivering it.

You don't want to "wire for fire" or to "learn by burn."

Kayo Ong
#5508
Lic 9D NY


[Non-text portions of this message have been removed]






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated