I just bent a piece of 5/16" keystock 90 degrees. Square recess is 8mm -- same basic size. Once you have plug out you can replace with a hex head if desired (most parts houses have beaucoups of different size plugs), but IMHO would be harder to maneuver against cross member than the stock plug. Bill Robertson #5939 >--- In dmcnews@xxxxxxxxxxxxxxx, Soma576@xxxx wrote: > In a message dated 1/11/03 8:43:00 AM Central Standard Time, > chrismoore@xxxx writes: >except for the drain plug! the drain plug is a peculiar >one, one that i have never seen on any other car that has ever come thru >my >store. it is similar to a 3/8 drive slot, but smaller (metric). i made >my >own tool by grinding down an old 3/8 ratchet. perhaps if you could find >a >suitable tool (maybe the D vendors have one? or at least they would know >exactly what to use)