Re: [DML] 3rd Brake light
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] 3rd Brake light



Tom:

Just get two sets (for the left and right side) that fits between the 
louver's opening. You can flip and mount them up side down with double stick 
tape (that come with it) underneath the louvers. You can also add a very 
thin bead of silicone glue around the perimeter before you press them into 
place. This will help to seal up the edges from allowing water to capillary 
between the units and the louvers while adding extra strength to secure the 
unit to the louvers. And do clean/scrap off the excess oozed silicone glue.

I have two sets of LED units that are about 16" long which were mount about 
five years ago and they are BRIGHT and they do not interfere with my back 
view at all. They do look "right" and are not obtrusive or gaudy. I can 
send you pics just, forward me your email address. 

Kayo Ong
#5508
Lic 9D NY

------------------------------------------------------------------------------

-----------------------------------------------------

In a message dated 1/9/03 5:17:53 PM Eastern Standard Time, 
UnknownSender@UnknownDomain writes:

> 
> Not to beat this to death but does anyone have a source or a brand/model 
> number for a 3rd brake light that fits underneath the top louver? I 
> don't mind the one that sits on top of the upper louver but for pure 
> asthetics I think I'd rather place it underneath so it is invisible 
> until activated. 
> 
> Tom
> #005732
> 
> 

[Non-text portions of this message have been removed]






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated