Re: No power beyond 4000 rpm

From: "hmcelraft" <hmcelraft@xxxx>
Date: Sat, 23 Nov 2002 16:07:57 -0000

Scott

If it ran fine before the control pressure regulator change I would 
suspect that there is a vacuum line messed up. The routing of the 
lines is tricky and easy to mess up so check the routing. Also, be 
sure to check the condition of the lines and be sure the one way 
delay valve at the regulator is installed the correct direction.

Harold McElraft
3354

References:
- No power beyond 4000 rpm
  - From: Scott Mueller

Prev by Date: Re: [DML] License Plate suggestions
Next by Date: [no subject]
Previous by thread: No power beyond 4000 rpm
Next by thread: Delorean Financing website update.
Index(es):
- Date
- Thread

Back to the Home of PROJECT VIXEN

Copyright ProjectVixen.com. All rights reserved.
Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive DMCNews Mailing List Archive DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated