Re: [DML] No power beyond 4000 rpm
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] No power beyond 4000 rpm



Scott, Now that that has been replaced. I would be sure the 02 adjustment is 
now correct. In other words, get the car hot and readjust. Be sure the spark 
advance/timing is ok. If this doesn't do it, then you many need to look at 
the injectors. Clean or new makes a big difference. 

<< My car has no power beyond 4000 rpm.

It was having hard start problems. A new warm-up regulator solved that
problem.

Now it won't run past 4000 rpm while driving.

Last spring, I did a major tune-up and it ran fine. My fuel
pump/suction line/strainer are fine. I have a new accumulator and fuel
filter installed. Also the injectors were replaced last spring.

What should I do next? I can't remember if this is a characteristic of
a failing coil. The car has about 27K on it.

What do you think?
>>





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated