I recall that someone had there binnacle recovered in leather which was sewn. The picture looked good. Scott Mueller 002981 DOA 5031 DML DMC Forum RDOLA -----Original Message----- From: twinenginedmc12 [mailto:twinenginedmc12@xxxx] Sent: Saturday, November 09, 2002 9:35 AM To: dmcnews@xxxxxxxxxxxxxxx Subject: [DML] Re: Binacle and Dashboard What's up, Doc. Yes and No. I have refinished my dashboard with good results, using high quality vinyl with woven(not felt)backing glued with contact cement. You'll have to take it out first, which is a total pain even with the windshield removed. The added width from the new vinyl made reinstallation difficult, though possible. I cut a 3inch hole where the speakers go, finished with a grill I have attempted, and failed, to refinish my severely cracked binnacle, though I'm sure I could, if I were motivated. I'm not, my car uses a Prelude binnacle. Good luck. Rick Gendreau --- In dmcnews@xxxx, doctorDHD@xxxx wrote: > Has anyone refinished their own binnacle and / or dashboard with good > results? I would like to find out how this can be done. > > Dave > 6530 > > > [Non-text portions of this message have been removed] To address comments privately to the moderating team, please address: moderators@xxxx To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/