--- In dmcnews@xxxx, doctorDHD@xxxx wrote: > Does anyone know how to straighten / prevent the bumps in the front fascia > over the headlights? > > Dave > 6530 > > > [Non-text portions of this message have been removed] Yes, In my case, I epoxied a steel bar, 1/8"by1/2", cut to length, along the entire inner length of the fascia above the headlights. Before gluing, I put the slight curve needed into the bar by precision hammering along one edge, and trial clamped the piece in place to make sure the eyebrows were alleviated before putting in the glue (PC- 7, my favorite, messy but very effective) I've talked to others who've successfully used aluminum and windshield adhesive bead, which I think is also a very nice idea. Getting my fascia back on was hard, because it had shrunk by about .3% in length over the years, and there isn't a provision for adjustment of the mounting points on the car in that dimension. My car didn't have eyebrows when I bought it, but developed them while the fascia was stored off of the car, which I thought was pretty weird. Rick Gendreau