[DML] Non Starting problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DML] Non Starting problem



I checked the Idle speed motor and it is working. I got it to fire up and was able to keep it running for a minute by keeping my foot on the gas, but it smelled like it was running real rich. I know the timing has got to be off so is there a way to get the timing set fairly close so I can get it idling to set it correctly?
On Wednesday, November 6, 2002, at 05:47 PM, dherv10@xxxx wrote:


Phil, Two things to check.
#1 Is the connection on the top of the idle speed motor good and tight. Is it
getting power and opening the valve when the throttle is in the rest position.
#2. Since it sounds like it's choking down. Turn the bottom idle screw clock
to open up the throttle body butterflies a little more and then see what
happens.
Be sure to not flood the car by trying to keep on cranking it. If need be,
unplug the cold start valve and try it again.
John Hervey
www.specialTauto.com



<< Now that these things have been replaced/repaired. I can't get the thing to stay running. When you turn the key, It fires up and as soon as it settles down to idle it dies or if it does run, runs rough and dies if you step on the throttle.



To address comments privately to the moderating team, please address:
moderators@xxxx

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/








Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated