Re: Luggage Rack Installation
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Luggage Rack Installation



In the final issue of the 'zine, I wrote a piece on the install of the
luggage rack, and touched on the absence of the rivets. I think the solution
was to line up the rack visually, based on the factory photos and then
measure from side to side to ensure a match. There are also some spot welds
which can be used as a guide, too. Nevertheless, there's no substitute for
measuring, and then measuring again.

I also recall that when drilling the lower holes for the hinges, take care
that the when the drill bit goes through, it doesn't accidentally hit the
pontoon and mar, or worse, put a hole in it!

James Espey
DeLorean Motor Company

> From: dmcnews@xxxxxxxxxxxxxxx
> Reply-To: dmcnews@xxxxxxxxxxxxxxx
> Date: 21 Oct 2002 08:45:48 -0000
> To: dmcnews@xxxxxxxxxxxxxxx
> Subject: [DML] Re: Luggage Rack Installation
> 
> 1. My car is a Nov 81 build, and while I've not yet pulled the
> weatherstripping 
> back, I have read that cars earlier than mine are missing the rivets to align
> the 
> template with. Any tips here on lining things up? 






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated