Re: [DML] Re: Manifold heat stove...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Re: Manifold heat stove...
- From: Martin Gutkowski <webmaster@xxxx>
- Date: Wed, 09 Oct 2002 15:00:13 +0100
Adam, it's most likely the heatshields on the top of the exhaust
crossover pipe. NB they can feel tight even when they're not. I could
not move them by hand, but only by enthusiastically thumping the pipe
did I discover the rattle that had been driving me up the wall. In
trying to undo the mounting nuts I discovered the one of the mounting
brackets was broken on one side. I clamped the whole lot down with a big
jubilee clip - it's a bit heath-robinson, but it works and nobody ever
sees it.
Martin
#1458 & #4426
Adam wrote:
I was wrong about the vibration sound: its back, exactly the same as
before I removed the heat stove. John thinks it may be a motor mount,
I will check it out tomorrow.
Adam
Back to the Home of PROJECT VIXEN