RE LED's and strange wiring

[Martin Gutkowski <webmaster@xxxx>]

Hi Matt

I'm not quite sure what you're trying to do here - do you mean you've 
wired up another pair of turn signals? What LEDs have you used? Are they 
meant for 12v? Can you connect them to a 12v source and have them light up?

Best Wishes

Martin
#1458 & #4426 (picking up from Germany this weekend - yay!)

From: "M. P. Olans" <mpolans@xxxx 
<http://groups.yahoo.com/group/dmcnews/post?protectID=029154253078158116090218141148130239041248042046167121181>> 

Date: Thu Oct 3, 2002 7:17 pm
Subject: LED's and strange wiring



Wired the same way and sharing the ground
with the brakelights (from the plug going into the circuit board.)
The problem is when I hit the turn signal switch or the hazards
switch, the turn signals work as normal but the LEDs do not work along
with them. We checked polarity and they are wired just as the red
LEDs are, and the red ones work, just no joy on the amber ones.
Anyone have a similar problem or run into something like this? Let me
know, we're stumped!