Hello Everyone, I received this email from an Engineer at Lotus in England. I'm sure that all of our technical knowledge about the DeLorean engine can assist this gentleman about the K-Jetronic management system. Best Wishes, Michael R. Pack RE/MAX COLUMBIA 800-899-7629 Subject: PRV control system. Date: Wed, 25 Sep 2002 6:09 EST From: "Grewcock. Charlie" <CGrewcock@xxxx> To: "'Senatorpack@xxxx'" Dear all, I have recently transplanted a PRV 2.7 from a R25 auto into my 1967 VW camper van,it is coupled it to a Renault GTA gearbox just incase you were worry about 5 fast reverse gears. I'm a little concerned that the engine is not running correctly as I have removed a lot of the what I believe to be controlling systems for the engine to car loom (Idle control for the auto). The engine does run fine at present but it seems to be running rich. Does any one know what controls the cold start injector/system as I think I may have removed it from the engine loom. Also , what can be done to check if the cold start injector is operating correctly,where does it take its signal from. I have Digi pictures of the conversion and will send them soon, Its quiet a site. Charlie Grewcock Product Support Engineer Lotus Engineering Hethel Norwich Tel. (01953)-608-908 Fax. (01953)-857-006 Mob (07768)-404-672