Either replace the two copper gaskets (washers) or polish them on a piece of very fine wet/dry sand paper or emery cloth. Make sure that the washers are clean and flat. Good practice is to use the copper washers once, then toss. Scott Mueller 002981 DOA 5031 -----Original Message----- From: Aaron King [mailto:floodle@xxxx] Subject: [DML] Gas leak I have a different problem. When the car is idling (I haven't tried taking it out with a gas leak) there is gas leaking from the coldstart valve. There is a hose that goes from the coldstart valve to the fuel distributor I think, and it appears to be leaking from that hose right where it goes into the coldstart valve.