To use the Fanzilla it is important to have a stock set-up. Any mods to the wiring of the cooling system except using a higher capacity circuit breaker will change the operation of the Fanzilla. It is also recomended to replace the Otterstadt switch as the old one usually doesn't have the right set-points and may come on too early or too late and make the fans run too long. For further info contact P.J. Grady. The Fanzilla was intended for the stock set-up because there are just too many things that could be changed and then you would have to test each change for it's affect on the Fanzilla. This was meant to be a "plug n' play" deal. David Teitelbaum vin 10757 --- In dmcnews@xxxx, Mark Noeltner <mark@xxxx> wrote: > Does the Fanzilla affect the fan vs. AC cycling? Or would this still be a > good modification to do even if you have a Fanzilla installed? > > Mark N > VIN 6820 > > At 02:03 PM 8/6/02 +0100, you wrote: > >Hi John > > > >Darryl's mod makes the fans run continuously when the AC is on, but > >allows the compressor to cycle normally. Hell, I could make this a