I noticed on later cars there is both a high and low pressure switch (But it is near the condenser).. While working on 01860 I saw the plug and jumper your speaking of. I assumed this was for the intended high pressure switch. Nothing was broken, so I did not mess with it. :) > -----Original Message----- > From: Martin Gutkowski [mailto:webmaster@xxxx] > Sent: Tuesday, August 06, 2002 9:03 AM > To: dmcnews@xxxxxxxxxxxxxxx > Subject: Re: [DML] Darryl's AC fan mod > > > Hi John > > Darryl's mod makes the fans run continuously when the AC is on, but > allows the compressor to cycle normally. Hell, I could make this a > plug'n'play solution :-) Does anyone know why there's that bizarre > "removable link" in the orange/pink feed to the evaporator - > you can see > it in the passenger footwell. You pull the feed from this and use it > (via the diode) to run the fan relay. This places the "drive" for the > fans up-stream of the low pressure switch. > > Martin > #1458 >