Geting your door open may require some help. While you pull the cable inside to release the locks have a helper try to open the door. Sometimes the door is stuck on the latch pin and won't "pop" open just by releasing the latch. After opening the door inspect to see if the latch pin is properly aligned and not rubbing the door in the wrong place. It is a bad idea to defeat the latch, try to keep front and rear latches operable. If the rods flex too much it is usually caused by not being properly adjusted. Forcing the doors because of being out of adjustment will cause the rods to flex eventually causing the door to jam. If the doors aren't working smoothly fix before they jam. David Teitelbaum vin 10757 > My problem is that just recently my driverside door is locked > up in the front. It is not the selianoids, and adjusting or moving > the rod on the inside of the door wont help. if any one has any > advice on this problem, any help is apreciated.