Re: [DML] Quick temp gauge question - correction Date: Mon, 24 Jun 2002
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Quick temp gauge question - correction Date: Mon, 24 Jun 2002 23:25:46 -0400



I'm sorry Joe but that would be the pressure sender for oil press gauge.
The sender for the temp gauge is located on the inside of the right block,
right about where the heater core valve would be. It is pointing up and to
the left under the intake manifold on right side. You do not have to remove
any parts to get to it. If you find the distributor on the left you'll find
that the sender is in about(!) the same place on the right.
You can email me privately if you can't find it. I can guide you to it over
the phone.

Take care
Tom Niemczewski
vin 6298 (FOR SALE)
tomcio@xxxx

----- Original Message -----
From: "DMC Joe" <dmcjoe@xxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Monday, June 24, 2002 2:46 PM
Subject: Re: [DML] Quick temp gauge question


> The sender is located on the right side of the engine block next to the
oil
> filter (P.M. 1/1/1 #22).
>
> DMC Joe Help Club
> DeLorean Web Mall: http://www.geocities.com/dmcjoe/home.html
>
> DeLorean Website Directory www.dmc.tv
>
> ----- Original Message -----
> From: "Digital Devices" <delorean@xxxx>
> To: <dmcnews@xxxxxxxxxxxxxxx>
> Sent: Sunday, June 23, 2002 1:32 PM
> Subject: [DML] Quick temp gauge question
>
>
> >
> > Where is the sending unit for the temp gauge?
> >
>
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated