Hello all, Yesterday I discovered a slight rattle at my left rear wheel when rolling. Since it disappeared when I touched the brakes ever so slightly (not slowing the car) I gathered it was the brake pads rattling. When checking for this I discovered my guess to be right, and found one of my wheelstuds to be stripped, so I had to replace that one with one I fortunately still had lying around on my broken hub carrier. But here's what surprised me; there were no anti rattle shims on the calipers on either side... Ths front DOES have them. I can't seem to find them in the partsmanual either. Even more surprising is that the rattle isn't the pads rattling against the cilinders or rotor, but on the retaining pins. Can anyone tell me what I can try to solve this? I think leaving it this way will cause the rattle to become even worse over time, but replacing the pads while still good is kind of a waste in my opinion. Maybe replacing the pins? Anyone know a cross-over for this so I don't have to order just two pins from overseas? If I had to costs would be tripled or more by the time I'd have them... Thanks in advance, JAN van de Wouw Thinking Different... Using a Mac... Living the Dream... Driving a DeLorean... #05141 "Dagger" since Sept. 2000 ------------------------------