Re: [DML] Horsepower - What a stock DeLorean should be expected to have
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Horsepower - What a stock DeLorean should be expected to have



As far as the 130 SAE HP rating you are speaking of, I can confirm to you
that if you have a stock DeLorean and you get it Dyno checked at the wheels,
you will not see anything higher than about 105 HP. In fact, if you see a
value this high, I would do another Dyno "pull" to confirm it. What you
should expect is something in the upper 90's to the low 100's. As far as
locating the extra 30 horses you might have to upgrade the engine to find
them. Recently, here in Knoxville, TN we had a ETDOC get together and had
about 6 (or 7) DeLoreans measured on a local Dyno outfit. Pretty much all
of the cars showed a similar output, but a couple did show a little high and
a little low. In the group, we had only one auto and it too showed an even
lower value (seems like mid to upper 80's, but I can be wrong here - sorry
Scott if I had this off). Also, as I recall, there was a similar Dyno
testing day that occurred about 2 years ago in the upper mid west (I think).
They had similar results with their "stock" DeLorean(s).

I hope this helps answer any questions that any of you might have about
where the HP is located and what you should expect it to be.

Sean Howley
VIN#2345






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated