Re: [DML] dimmer rheostatic wiring
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] dimmer rheostatic wiring



In a message dated 5/25/02 5:29:46 PM Eastern Daylight Time, 
delorean@xxxx writes:

<< anybody able to help me ..

what is the order that the 3 wires connect to the 4 prongs on the
rheostatic dimmer above the shifter?

--------------
| | | |

which 3 are used? >>


>From left to right viewing facing the connector with knob facing upwards,
First spade connector gets wire marked "1"
Second gets skipped.
Third gets wire with Grey band marked #2
Fourth gets unbanded #2.
I believe both terminals 3 and 4 are essentially the same (ie. electrically 
the same and connected together).
Jim 6147





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated