Re: [DML] oterstat
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] oterstat



Hank,

I just replaced mine a couple weeks ago. It doesn't look like there's any
good way to do a quick swap. After getting the otterstat out, you have to
remove the rubber seal, then put the new seal in, then put the new
otterstat in. The entire cooling system won't drain, only from the engine
to the otterstat, which isn't much. After the drainage stopped, I put the
new parts in, and had to use half a bottle or so of coolant and some
water. I have Joe's self-bleeding kit installed, so that eliminates the
process of getting the air out of the system.

Replacing the otterstat is one of the easier jobs to do.

-Christian

On Tue, 21 May 2002, Hank Eskin wrote:

>
> Hello Joe,
>
> I just bought a replacement oterstat and fanzilla from your site. I have
> one question: What's the easiest way to replace the oterstat? I don't want
> to drain/refill the entire cooling system - can it be swapped "quickly"?
> Any tips?
>
>
> thanks,
>
> -Hank
>
>
>
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>






Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated