Re: [DML] Re: Braided fuel lines
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Re: Braided fuel lines
- From: Peter Lucas <lucas@xxxx>
- Date: Sun, 5 May 2002 14:30:34 -0400
When I did my full-time fuel pressure sending unit project (reported in
the tech section at
http://www.dmcnews.com/Techsection/fuelpressend.htm ), I had a custom
braided SS line made at Baker Precision Bearings (see the article for a
link to their site). It was 24" long with an 8mm banjo fitting on one
side and a -3 BRA fitting on the other. Cost $20 complete and took
them only a day or two.
--Pete Lucas
VIN #06703
--- In dmcnews@xxxx, deloreanernst@xxxx wrote:
I'd like to replace my twenty year old butt-ugly fuel hoses. Has
anybody used custom made braided hose?
Back to the Home of PROJECT VIXEN