Re: [DML] Fw: rivnuts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DML] Fw: rivnuts



Marc, Walt and others. 
The subject of Rivets came up a couple months ago if i'm not mistaken, and I 
thought then I posted that I have the Tool and all the nuts in stock. I have 
Flushmount aluminum or flat head aluminum, Metric size 4,5,6,8,10. I also 
have nuts that are ribed in Steel yellow zink plating sizes 5,6,8,10.
The tool I can sell outright for about $45.00 and the nut are from about 40 
cents to 75 cents ea. If you don't want to buy the tool, then I can let you 
use it for a deposit. Just let me know what you want and how many. I will 
post all the information on the site next week.
John hervey


<< I found this same kit in my search. It would be a good candidate for the 
shade tree DeLorean mechanic, but is missing the 8mm size. Does your 
supplier have a mandrel for 8MM that will fit in this tool? If so, how much 
is it?
>>





Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated